RESITRIX® SK PARTIAL BOND
... the Partially Self-Adhesive Alternative
RESITRIX® SK PARTIAL BOND is a partially self-adhesive seam-weldable EPDM waterproofing membrane.
Our EPDM waterproofing membrane RESITRIX® SK PARTIAL BOND poffers all the advantages of EPDM and the RESITRIX® family, combined with the benefits of a cold applied self-adhesive waterproofing membrane.
You will be convinced by RESITRIX® SK PARTIAL BOND which is economical to use in all respects and offers the right alternative for every application with a bonded structure.
In the lap area, the self-adhesive underside is covered with a wafer-thin PE strip for a safe, durable seam sealed with hot gas without any unwanted advance bonding. Otherwise the membrane has a pull-off separating layer.
RESITRIX®SK PARTIAL BOND – with Convincing Product Properties:
- Adhesion-enabling top surface, glass scrim inlay
- Self-adhesive polymer bitumen underside with pull-off PE separating layer
- Versatile and durable in use
- Resistant to ageing and weathering without additional surface protection, in accordance with DIN 7864
- Safe seam welding with hot air even at outside temperatures down to -10°C
- Resistant to many chemicals and environmental emissions
- Complies with DIN 4102, Part 1 (building material class B2); resistant to flying sparks and radiant heat pursuant to DIN 4102, Part 7
- Contains no chlorine and plasticisers
- No heat shrinkage
- ENVIRONMENTALLY COMPATIBLE according to the available eco-balance
- Subject to internal and external monitoring in accordance with the requirements of the EN standards (CE), local certificates and the U.E.A.t.c. directives
RESITRIX® SK PARTIAL BOND Construction
| Material Properties | |
|---|---|
| Total thickness | 2.5 mm +/- 10 % |
| Weight | approx. 2.75 kg/m² |
| Standard Roll Length | 10 metres |
| Building material class | B2 |
DOWNLOADS
