RESITRIX® MB
... Specially for Mechanical Fixing
Membrane RESITRIX® MB has a total thickness of 3.1 mm ± 10% with a surface weight of approx. 3.5 kg/m². When laid loose with mechanical fixings, metal holding disks and galvanised screws are used, or screw/plastic combinations.
RESITRIX® MB – with Convincing Product Properties:
- Bitumen compatible, seam-weldable waterproofing membrane based on EPDM synthetic rubber
- Adhesion-enabling top surface, glass scrim inlay, polymer bitumen underside with PE film
- Resistant to ageing and weathering without additional surface protection, in accordance with DIN 7864
- Safe seam welding with hot air even at outside temperatures down to -10°C
- Complies with DIN 4102, Part 1 (building material class B2); resistant to flying sparks and radiant heat pursuant to DIN 4102, Part 7
- Contains no chlorine and plasticisers
- No heat shrinkage
- ENVIRONMENTALLY COMPATIBLE according to the available eco-balance
- Subject to internal and external monitoring in accordance with the requirements of the EN standards (CE), local certificates and the U.E.A.t.c. directives
RESITRIX® MB Construction
| Material Properties | |
|---|---|
| Total thickness | 3.1 mm +/- 10 % |
| Weight | approx. 3.5 kg/m² |
| Standard Roll Length | 10 metres |
DOWNLOADS
