RESISTIT® RPL E / RESISTIT® RPL GD

RESISTIT® RPL E and RPL GD are bitumen compatible waterproof membranes based on EPDM according to DIN 7864 and are made up according to the exactly measured dimensions of your roof.

Properties

• Bitumen compatible waterproofing membrane based on EPDM synthetic rubber
• Resistant to ageing
• Resistant to UV and IR radiation
• Normal flammability according to building materials class B2
• max. individual membrane size approx. 450 m²
• Large membranes are produced on site by hot bonding partial membranes
• Contains no chlorine and plasticisers
• No heat shrinkage
• Recyclable
• Subject to internal and external monitoring EN standards (CE), local certificates and the U.E.A.t.c. directives

RESISTIT® RPL E Material Structure

RESISTIT® RPL E are waterproofing membranes reinforced with glass scrim inlay intended for special loads. Accordingly, these membranes are particularly suitable for conventional roofs with superimposed load.

RESISTIT® RPL GD Material Structure

RESISTIT® RPL GD is a waterproofing membrane suitable for roof vegetation systems. It is supplied in thicknesses of 1.2 mm or 1.5 mm. These membranes carry a root-safe test certificate in compliance with the FLL guidelines.

Material Properties
RESISTIT® RPL E / RESISTIT® RPL GD

	RESISTIT® RPL E	RESISTIT® RPL GD
Total thickness	1.3 mm +/- 10 %	1.2 / 1.5 mm +/- 10 %
Weight	approx. 1.4 kg/m²	approx. 1.4 kg/m²
Glass Scrim Inlay	yes	nn